| Customization: | Available |
|---|---|
| Type: | Plunger Pump |
| Pressure: | 450bar-480bar |
Suppliers with verified business licenses
Atlas Copco Epiroc 57392003 Parker Denison T6CCM T67cbw T6ccw T67dB T6dc T6ees T7ees T6ee T7ee T7dB 2657392003 Vane Pump 1. Parker Denison pump T6 Single Vane Pump 2. Model T6E, T6ER, T7ERS, T6ERM T7ES, T6EM T7ES, T7BS T7E T7ES T7DS T7DRS, T6C, T6CM T6CR T6CRM T6CRM T6CR, T6D, T6DM T6DR, T6DMY T6DRMY T6DRM T7dbs T6ccmw T7bbs T67cb T6cc T6ccm T67cbw T6ccw T67db T6dc T67dc T6dcm T6dcw T67dcw T6dcmw T7dds T6dds T67eb, T7ebs T6ec T67ec T6ecm T6ed T7eds T6edm T6ees T7ees T6ee T7ee T7db 3. Interchangeable Vane Pump cartridge displacement as follow: T6C vane pump: 003, 005, 006, 008, 010, 012, 014, 017, 020, 022, 025, 028, 031 T6D vane pump: 014, 017, 020, 024, 028, 031, 035,038, 042, 045, 050 T6E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085 T7E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085 4. Feature below. The high pressure vane pump incorporates the design of vane pin holdout. They are applicable for those hydraulic machineries that demand high rotation pressure and low noise level. The vane pump series are designed for applications in die casting machines, injection molding machines and other special construction equipments. Hydraulic fluid: Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).
Atlas Copco Epiroc 57392003 Parker Denison T6CCM T67cbw T6ccw T67dB T6dc T6ees T7ees T6ee T7ee T7dB 2657392003 Vane Pump 1. Parker Denison pump T6 Single Vane Pump 2. Model T6E, T6ER, T7ERS, T6ERM T7ES, T6EM T7ES, T7BS T7E T7ES T7DS T7DRS, T6C, T6CM T6CR T6CRM T6CRM T6CR, T6D, T6DM T6DR, T6DMY T6DRMY T6DRM T7dbs T6ccmw T7bbs T67cb T6cc T6ccm T67cbw T6ccw T67db T6dc T67dc T6dcm T6dcw T67dcw T6dcmw T7dds T6dds T67eb, T7ebs T6ec T67ec T6ecm T6ed T7eds T6edm T6ees T7ees T6ee T7ee T7db 3. Interchangeable Vane Pump cartridge displacement as follow: T6C vane pump: 003, 005, 006, 008, 010, 012, 014, 017, 020, 022, 025, 028, 031 T6D vane pump: 014, 017, 020, 024, 028, 031, 035,038, 042, 045, 050 T6E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085 T7E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085 4. Feature below. The high pressure vane pump incorporates the design of vane pin holdout. They are applicable for those hydraulic machineries that demand high rotation pressure and low noise level. The vane pump series are designed for applications in die casting machines, injection molding machines and other special construction equipments. Hydraulic fluid: Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).
Atlas Copco Epiroc 57392003 Parker Denison T6CCM T67cbw T6ccw T67dB T6dc T6ees T7ees T6ee T7ee T7dB 2657392003 Vane Pump 1. Parker Denison pump T6 Single Vane Pump
2. Model T6E, T6ER, T7ERS, T6ERM T7ES, T6EM T7ES, T7BS T7E T7ES T7DS T7DRS,
T6C, T6CM T6CR T6CRM T6CRM T6CR,
T6D, T6DM T6DR, T6DMY T6DRMY T6DRM
T7dbs T6ccmw T7bbs T67cb T6cc T6ccm T67cbw T6ccw T67db T6dc
T67dc T6dcm T6dcw T67dcw T6dcmw T7dds T6dds T67eb, T7ebs
T6ec T67ec T6ecm T6ed T7eds T6edm T6ees T7ees T6ee T7ee T7db
3. Interchangeable Vane Pump cartridge displacement as follow:
T6C vane pump: 003, 005, 006, 008, 010, 012, 014, 017, 020, 022, 025, 028, 031
T6D vane pump: 014, 017, 020, 024, 028, 031, 035,038, 042, 045, 050
T6E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085
T7E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085
4. Feature below.
The high pressure vane pump incorporates the design of vane pin holdout.
They are applicable for those hydraulic machineries that demand high rotation pressure and low noise level.
The vane pump series are designed for applications in die casting machines, injection molding machines and other special construction equipments.
Hydraulic fluid: Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).
Q: What is our main application?
A: 1. Manufacturing hydraulic pumps and motors, reducers. We are factory.
2. Hydraulic spare parts and maintenance.
3. Construction machinery.
4. Brand replacement pumps & motors.
5. Hydraulic system.
Q: What is the payment terms?
A: Full order: 50% as deposit (50% down payment), 50% balance payment before shipment.
Small order or sample order: 100% full payment in advance.
Q: Can I mark my own brand on the pumps?
A: Yes, all products accept to mark your brand and code.
Q: What is our mainly international market?
A: Eastern Asia 5%, Western Europe 10%, Northern Europe 5%, Southern Europe 10%, South Asia 10%, Domestic Market 60%.
Q: How long is the production quality guarantee?
A: We provide 12 months quality warranty for all our hydraulic pumps and motors.
){kind=link}